Thompson’S Water Seal: Protecting Your Brick Chimney

You’re right to be cautious about using Thompson’s WaterSeal on your chimney. While it’s a great product for protecting wood and other materials from water damage, it’s not breathable and that’s a big problem for chimneys.

Chimneys need to breathe to allow moisture to escape, and if you seal them with a non-breathable product like Thompson’s WaterSeal, you risk trapping moisture inside. This can lead to a number of problems, including:

Mold and mildew growth: Moisture trapped inside a chimney can create the perfect environment for mold and mildew to thrive. This can be a health hazard, especially for people with allergies or respiratory problems.
Chimney damage: Moisture can also damage the brick and mortar of your chimney, leading to cracks, leaks, and even structural problems.
Fire hazards: In extreme cases, trapped moisture can even create a fire hazard.

So what should you use instead? Look for breathable coatings like Aquapel and Chimney Saver. These products will protect your chimney from water damage while still allowing it to breathe.

Here’s a more detailed explanation of why breathability is so important for chimneys:

A chimney works by drawing warm air and smoke up and out of your house. However, this process also draws in some moisture from the surrounding air. This moisture can condense inside the chimney, especially during colder months when there’s a big temperature difference between the inside and outside of your home. If the chimney can’t breathe, this moisture gets trapped and creates problems.

Breathable coatings allow this moisture to escape, preventing the problems I mentioned earlier. Non-breathable coatings, like Thompson’s WaterSeal, trap the moisture and lead to problems.

It’s important to note that even breathable coatings won’t completely eliminate moisture from your chimney. However, they will significantly reduce the amount of moisture trapped inside, making it much less likely to cause problems.

Absolutely! Thompson’s WaterSeal Clear Masonry Protector Waterproofer is a great choice for protecting your brick. It’s designed to provide lasting waterproofing protection for a wide range of masonry surfaces, including brick, pavers, concrete, stone, stucco, clay, and quarry tile.

Let’s dive a little deeper into why Thompson’s WaterSeal is a good option for your brick.

Thompson’s WaterSeal forms a breathable, protective barrier that repels water while allowing the brick to breathe. This helps prevent water damage from rain, snow, and other elements. It also helps protect against efflorescence, a white powdery deposit that can form on brick surfaces.

Here’s how Thompson’s WaterSeal can benefit your brick:

Protection from the elements: By forming a barrier against water, Thompson’s WaterSeal helps prevent moisture from seeping into the brick, protecting it from damage caused by freezing and thawing cycles. This is especially important in climates that experience harsh winters.
Enhanced durability:Thompson’s WaterSeal can help extend the life of your brick by protecting it from the elements. This can save you money on costly repairs and replacements in the long run.
Improved appearance: Thompson’s WaterSeal can help maintain the look of your brick by preventing stains and discoloration. It can also help enhance the natural beauty of your brick by bringing out its color and texture.

Remember to follow the manufacturer’s instructions carefully when applying Thompson’s WaterSeal to your brick. Applying it correctly ensures you get the best results and maximize the product’s effectiveness.

Thompson’s Water Seal can only be used on bare and uncoated brick, stone, or concrete. When applied correctly, it can last up to four years. This lifespan, however, depends on factors like the wall’s orientation and the local climate.

Let’s break down why these factors matter. The wall’s orientation refers to whether it faces north, south, east, or west. Walls facing south receive the most direct sunlight, leading to more rapid drying and potentially faster degradation of the sealant. The local climate plays a crucial role too. Areas with high rainfall and humidity will experience faster weathering of the sealant compared to drier climates. For example, if you live in a region with harsh winters and frequent freeze-thaw cycles, the sealant may need to be reapplied sooner.

To get the most out of your Thompson’s Water Seal, here are a few tips:

Thoroughly clean the surface before application. Make sure the brick is free of dirt, grime, and loose particles.
Apply two coats of sealant. This creates a more durable and protective barrier.
Allow the sealant to dry completely between coats. Follow the manufacturer’s instructions for drying times.
Inspect the sealant regularly. Look for any signs of cracking, peeling, or fading. If you notice any issues, it’s time to reapply the sealant.

Following these simple steps will help ensure that your Thompson’s Water Seal provides long-lasting protection for your brick.

LastiSeal is a top-performing chimney sealer. If your chimney is built of porous materials like brick, concrete block, stucco, manufactured stone, or limestone, then LastiSeal is a great option.

LastiSeal is a high-quality sealant that is designed to protect your chimney from water damage. It is made from a special blend of polymers that create a durable, waterproof barrier. This barrier helps to prevent water from seeping into the brickwork and causing damage. LastiSeal is also resistant to mildew and algae growth.

Here are some of the benefits of using LastiSeal to waterproof your chimney:

Prevents water damage: LastiSeal helps to keep your chimney dry and prevent water damage. Water damage can lead to a variety of problems, including leaks, mold growth, and structural damage.
Increases the life of your chimney: By protecting your chimney from water damage, LastiSeal can help to increase its lifespan.
Easy to apply: LastiSeal is easy to apply and can be used on a variety of surfaces.
Durable and long-lasting: LastiSeal is a durable and long-lasting sealant that will protect your chimney for years to come.

If you are looking for a way to waterproof your brick chimney, LastiSeal is a great option. It is a high-quality sealant that is easy to apply and will protect your chimney from water damage.

You don’t want to trap moisture in your chimney, as this can lead to problems like mold and damage to the masonry. Instead of using a sealer, use a special water repellent spray. Start at the bottom of the chimney and spray upwards to the top. A second coat of spray can be applied a few minutes after the first. This will help to create a protective barrier that repels water, keeping your chimney dry and healthy.

It’s important to choose a water repellent specifically designed for masonry. These products are formulated to penetrate the pores of brick and mortar, creating a barrier that prevents water from entering. They also allow the masonry to breathe, which prevents moisture from becoming trapped. When applying the water repellent, make sure to cover the entire surface of the chimney, including the crown, flashing, and any cracks or crevices. It’s a good idea to apply the repellent on a dry day and allow it to dry completely before exposing it to rain.

Remember, a water repellent is a temporary solution. It’s a good practice to inspect your chimney regularly for any signs of damage and to reapply the repellent as needed. This will help to keep your chimney in good condition and prevent costly repairs down the road.

Silane/Siloxane sealers are the best choice for protecting all masonry materials, including stone, brick, pavers, and concrete. These sealers chemically react with the surface to create a hydrophobic barrier within the pores. This means water can’t penetrate the surface, protecting your brickwork from water damage.

So, why are Silane/Siloxane sealers the best? They offer a range of benefits that other waterproofing solutions simply can’t match.

Durable and Long-Lasting:Silane/Siloxane sealers are incredibly durable, meaning they’ll protect your brickwork for years to come. They also resist fading and discoloration, ensuring your brickwork stays looking its best.
Breathable: Unlike some other waterproofing solutions, Silane/Siloxane sealers allow moisture to escape from within the brickwork. This prevents moisture buildup, which can lead to problems like mold and mildew.
Easy to Apply:Silane/Siloxane sealers are easy to apply, making them a great choice for DIY projects.

To ensure you’re getting the most out of your Silane/Siloxane sealer, it’s important to follow the manufacturer’s instructions carefully. This includes preparing the surface properly, applying the sealer in thin coats, and allowing sufficient drying time between coats.

When selecting a Silane/Siloxane sealer for your brickwork, consider the specific needs of your project. Some Silane/Siloxane sealers are formulated to provide a higher level of protection against specific weather conditions, such as extreme heat or freezing temperatures.

Thompson’s Water Seal is a fantastic product for protecting your bricks, mortar, stone, and concrete from the elements. It uses advanced silicone micro emulsion that soaks deep into the material to provide long-lasting protection against rain damage. The product is designed to withstand rain, so you don’t have to worry about it getting wet.

Here’s how Thompson’s Water Seal works to protect your surfaces from rain:

Repels Water: The silicone micro emulsion creates a barrier that repels water, preventing it from penetrating the surface. This helps to protect your materials from the damaging effects of rain, such as water damage and staining.
Allows Surfaces to Breathe: While the sealant repels water, it still allows the surface to breathe, preventing moisture from becoming trapped. This helps to prevent mold and mildew growth, ensuring the longevity of your materials.
Durable Protection: The sealant is designed to last for years, providing continuous protection from rain and other weather elements. This means you won’t have to reapply it frequently, saving you time and money.

It’s important to note that Thompson’s Water Seal is not intended to be a waterproofing product. It is a water repellent, which means it will help to repel water, but it won’t completely prevent water from penetrating the surface. However, even if some water does seep through, the sealant will help to protect your materials from the damaging effects of moisture.

You can apply Thompson’s Water Seal even if it’s raining, but it’s best to apply it when the surface is dry and the weather is clear. This will help to ensure that the sealant penetrates the surface properly and provides the best possible protection.

You only need one coat of Thompson’s WaterSeal Wood Sealer. If you want a deeper color, you can add a second coat. Let the first coat dry for about two hours. If you’re adding a second coat, you need to apply it within four hours of the first coat.

Here’s why you may want to consider applying a second coat:

More protection: A second coat of Thompson’s WaterSeal can give your wood a little extra protection against the elements, especially if it’s exposed to harsh conditions.
Deeper color: If you want a richer, darker color on your wood, a second coat can achieve that. Thompson’s WaterSeal comes in several different shades, and applying a second coat can deepen the tone.
Even coverage: If you’re unsure about the coverage of your first coat, applying a second coat can help ensure that the entire surface is protected.

How to know if you need a second coat?

If the wood is still absorbing the Thompson’s WaterSeal and the color isn’t even, then you may need a second coat. It’s always better to err on the side of caution and apply an extra coat if you’re unsure.

Taking care of your chimney is important! A high-quality chimney brick sealer can help you avoid costly repairs and keep your home safe. Think of it as a preventative measure.

You know how important it is to maintain your home, and your chimney is no exception! A brick chimney sealer acts as a protective barrier against the elements. Over time, brick can become porous, allowing moisture to seep in and cause damage. This moisture can lead to cracks, crumbling, and even mold growth. A chimney brick sealer creates a waterproof layer that prevents moisture from penetrating the brick. This means your chimney will be better protected from the damaging effects of rain, snow, and ice. In addition to preventing moisture damage, a brick chimney sealer can also help to prevent efflorescence. This white, powdery substance is a sign that moisture is trapped within the brick.

Not only does a brick chimney sealer protect your chimney, but it also improves its appearance. A fresh coat of sealer can make your chimney look new again. If you’re thinking about selling your home, a sealed chimney can be a great selling point.

So, if you want to protect your investment and keep your home safe, be sure to seal your brick chimney. A little bit of preventative care can go a long way!

You’re looking for a way to remove Thompson’s Water Seal from brick, right? I get it! Sometimes, you need to get rid of that sealant, whether it’s for a new project or because it’s old and needs replacing.

EC-1800 is a great option to remove Thompson’s Water Seal from brick, concrete, and wood. It’s a natural and eco-friendly solution that’s safe for the environment.

Here’s what makes EC-1800 so effective:

Beneficial Microbes: These tiny organisms help break down the sealant, making it easier to remove.
Surfactants: These chemicals help loosen the sealant from the surface, allowing it to be wiped away.
Rust Inhibitors: This helps prevent rust from forming on metal surfaces, which can happen when removing sealants.

How to Use EC-1800:

1. Apply the EC-1800 to the surface you want to clean. Make sure to follow the manufacturer’s instructions for application.
2. Let the product sit for the recommended amount of time. This will allow the microbes and surfactants to do their work.
3. Gently scrub the surface with a brush or sponge. This will help remove any remaining sealant.
4. Rinse the surface thoroughly with water. This will remove any residue from the cleaning process.

Remember: Always test the EC-1800 in a small, inconspicuous area first to ensure it doesn’t damage your brick.

Important Note: Thompson’s Water Seal is a tough sealant! It can take time and effort to remove it completely. Be patient and persistent, and you’ll get the job done. If you’re still having trouble removing the sealant, you may want to consult with a professional.

Thompson’s WaterSeal Clear Masonry Protector Waterproofer is a great product for protecting your masonry. It’s been proven to waterproof pavers, brick, concrete, stone, stucco, clay & quarry tile, and exterior masonry surfaces. While the actual coverage will vary based on the surface material’s porosity, you can be sure that your masonry will be protected from the elements.

Let’s break down exactly how Thompson’s WaterSeal helps protect your masonry. When you apply it to your surface, it creates a protective barrier that prevents water from penetrating the material. This barrier protects your masonry from damage caused by water, such as cracking, spalling, and efflorescence.

Water damage to your masonry can happen for a number of reasons. If you live in an area that gets a lot of rain, your masonry is constantly exposed to moisture. And if you have a pool or hot tub, the splashing water can also damage your masonry. Even snow and ice can cause problems, especially if the water seeps into the pores of the material and then freezes. Thompson’s WaterSeal provides an extra layer of protection, ensuring that your masonry stays looking good for years to come.

Think of it like this: Your masonry is like a sponge. It’s full of tiny pores that allow water to soak in. When water gets in, it can cause problems. Thompson’s WaterSeal seals those pores, preventing water from getting in and damaging your masonry. It’s like putting a raincoat on your masonry!

So, if you’re looking for a way to protect your masonry from the elements, Thompson’s WaterSeal Clear Masonry Protector Waterproofer is a great choice.

Thompson’s WaterSeal offers powerful protection against water damage. It creates a mildew-resistant coating that helps keep your surfaces dry. However, it’s important to note that you shouldn’t apply a surface coating product like varnish or polyurethane to exterior brick, concrete, stone, or other masonry surfaces.

Why is this important?

Think of it like this: You’re building a house. The foundation is your masonry, the walls are your surface coating, and Thompson’s WaterSeal acts as a sealant to keep the house dry. If you put a coating on the foundation before sealing it, you’re essentially trapping moisture inside. This can lead to serious problems like cracking, flaking, and even mold growth.

Imagine you’re trying to waterproof a boat. You wouldn’t put a layer of paint over the wood before sealing it, right? The paint would trap moisture and cause the wood to rot. The same principle applies to masonry surfaces.

Here’s what you need to do:

Clean the surface thoroughly: Make sure your brick, concrete, or stone is clean and free of dirt, debris, and loose particles. This allows the WaterSeal to penetrate the surface properly.
Apply Thompson’s WaterSeal according to the instructions: Follow the manufacturer’s recommendations carefully. This ensures proper coverage and maximum protection.
Avoid applying other coatings: Stick to using WaterSeal alone. This allows the sealant to do its job effectively and prevents moisture from becoming trapped.

By following these simple steps, you can ensure your masonry surfaces are well-protected from water damage and look their best for years to come.

You can definitely use Thompson’s Water Seal on concrete! It’s a great choice for protecting your concrete surfaces from water damage.

Here’s the key to success: Treat the whole wall, don’t just focus on isolated areas. If you only treat parts, you could create weak spots where water can still seep in. Always make sure the first coat has dried completely before applying the second coat.

Thompson’s Water Seal uses a special micro silicone emulsion that acts like a barrier against water. It’s designed for use on brick, concrete, and stone, so you can trust it to protect your surfaces.

Here’s a closer look at how Thompson’s Water Seal works on concrete:

Penetration: The water seal’s formula allows it to penetrate the concrete pores, creating a water-resistant layer. This prevents water from soaking in and causing damage.
Durability: The micro silicone emulsion creates a tough, long-lasting barrier that resists cracking and peeling. This ensures your concrete stays protected for a long time.
Flexibility: The sealant is flexible enough to move with the concrete, allowing it to withstand temperature changes and prevent cracking.

Important Tip: Before applying Thompson’s Water Seal, make sure your concrete is clean and dry. Any dirt or debris can interfere with the sealant’s effectiveness. Also, follow the manufacturer’s instructions carefully for the best results.

Using Thompson’s Water Seal is a simple and effective way to protect your concrete surfaces from water damage. Just remember to apply it evenly to the entire surface and follow the manufacturer’s directions.

Water can cause a lot of problems for your brick chimney. It’s the main reason chimneys start to fall apart. That’s why waterproofing your brick chimney is so important. It’s like giving your chimney a raincoat to protect it from the rain and snow.

Think about it: rain, snow, and even condensation can easily seep into the brick and mortar of your chimney. This moisture can lead to a whole host of issues, including:

Cracks and crumbling mortar: Water weakens the mortar that holds your bricks together. Over time, this can lead to cracks and crumbling, making your chimney unstable.
Efflorescence: This white, powdery substance is a sign of salt buildup caused by moisture. While it doesn’t necessarily mean your chimney is in danger, it’s a warning sign that water is getting in.
Mold and mildew growth: Dampness creates the perfect breeding ground for mold and mildew, which can be harmful to your health and damage your chimney.
Rusting metal components: Metal parts like flashing, dampers, and flue liners can rust and deteriorate if exposed to moisture.
Chimney fires: Waterlogged soot and creosote can ignite, leading to a dangerous chimney fire.

By waterproofing your chimney, you’re creating a barrier that prevents water from getting in. This helps keep your chimney strong, safe, and in good condition for years to come.

Can Thompson Water Seal for Masonry Be Used on Chimneys?

Unlike breathable sealants like Aquapel and Chimney Saver, Thompson’s WaterSeal isn’t breathable, meaning it can trap moisture within the chimney structure. masonrygeek.com

How-To Use Brick & Masonry Products

It’s important to protect brick, concrete, or masonry surfaces that are in direct sunlight as well as shaded areas. By using Thompson’s® WaterSeal® Waterproofers, you will provide a mildew resistant coating Thompson’s® WaterSeal®

How to correctly seal brickwork with Thompson’s

Thompson’s Water Seal uses a unique micro silicone emulsion to help stop water in its tracks and is suitable for use on brick, concrete and stone. Providing long Professional Builder

Should I Seal My Brick Chimney – The Ultimate Guide

Sealing a brick chimney is an important step in preventing water damage. Moisture can seep into the bricks and mortar, causing them to become weak and masonrygeek.com

preparing to apply Thompson’s water sealant to a chimney part 1

I have a business that puts money back in your pocket on things you are already buying. PLUS, my team has over 70% of people who are successfully taking acti… YouTube

Thompson’s: Waterproofing Masonry – Professional Builder

A water-based water seal is best suited to treat and protect large areas, covering both brick and mortar. Most formulations offer a unique micro silicone emulsion Professional Builder

Waterproof Plus Masonry Protector | Thompson’s® WaterSeal®

Thompson’s® WaterSeal® Clear Masonry Protector Waterproofer provides proven waterproofing protection for pavers, brick, concrete, stone, stucco, clay & quarry tile and Thompson’s® WaterSeal®

Water Seal for Waterproofing | | Thompson’s

Our renowned Water Seal has a reputation for providing long lasting waterproof protection and can be used on brick, concrete and stone. Find out more here. Thompson’s Weatherproofing

5 Myths about Waterproofing Chimneys | Chimney Heroes

Did you know that nearly every chimney you encounter has signs of water damage? Brick chimneys absorb water like a sponge. Oftentimes, leaks in attics and Chimney Heroes

All About Waterproofing a Brick Chimney

Instead of using a sealer, use a special water repellent spray by starting at the bottom of the chimney and spraying upwards to the top. It’s helpful to be able to do a Vertical Chimney Care